Amen Savior frame / Invader "Satellite" fan blade wheels in Seattle

feeds@yuku.com (Hollywood Jon) — Sun, 08 Nov 2009 00:27:02 GMT

Hey all,
Thanks to the introduction by Naguethey and Spiderchopper in Vacaville, Ca.
FRAME
It's true, I have a late 70's Amen Savior fame including suspension parts. Frame is straight with no broken welds. Fender and struts have been added on frame, easy fix. Frame should fit a Kawasaki 900 (will also fit Honda 750 with some work).
Price is $350 - does not include shipping, local pick-up only.
WHEELS
I also have a set of Invader "Satellite" fan...

836 kit piston set and rings

feeds@yuku.com (painfullstephen) — Sat, 07 Nov 2009 22:38:29 GMT

anyone got this kit available and how much? 74 750 motor

Pipes

feeds@yuku.com (Sasquatch) — Sat, 07 Nov 2009 21:40:04 GMT

Ebay,not mine 3 days to go @ $9.50 .He also has CB750 wheels.............................

FRONT AXLE SPACERS

feeds@yuku.com (asphaltwarrior1) — Sat, 07 Nov 2009 21:07:43 GMT

i need atleast four of the stock front axlespacers ..the ones that slip inside the small seal on the side opposite from the speedo drive..lemme know what ya got and what ya need for them..thanks lenny

night of the living dead.

feeds@yuku.com (onesickrace) — Sat, 07 Nov 2009 20:24:26 GMT

i havent posted too much on here, a few here and there... i just read and reread...with out this site/community, i couldnt have done it for sure. huge thanks. got the 750 thats been sitting dormant for 15 years going on the simplified wiring diagram. its runnin rough, but its running...tomorrow is to be 70 degrees in indy, so ill be out around brown county all day tomorrow on the chop... and ill tune the 750 over the next few days... thanks again everyone!

750

feeds@yuku.com (lilarky52) — Sat, 07 Nov 2009 19:23:33 GMT

http://i285.photobucket.com/albums/ll48/lilarky52/DCFC0010-1.jpg
http://i285.photobucket.com/albums/ll48/lilarky52/DCFC0011.jpg
http://i285.photobucket.com/albums/ll48/lilarky52/DCFC0012.jpg

Hey Leon

feeds@yuku.com (olgraybeard) — Sat, 07 Nov 2009 19:02:00 GMT

Are you working in your new shop yet on that old cafe??

SOUTH FLORIDA MEET 2/24-2/26/2010

feeds@yuku.com (crazychris) — Sat, 07 Nov 2009 17:44:43 GMT

Gang,
We would like to know how many of us would like to come to sunny South Florida (Punta Gorda) a couple of days before "BIKE WEEK 2010" in Daytona this year. This is simply a fact finding mission to see if there is enough interest to hold a meet. Punta Gorda and the surrounding area has some of the best coast line to cruise and there are a few good campgrounds in the area. However, I suggest motel 6 or Days Inn. We are located approx 2.5 hrs south of Daytona,...

vintage flat tracker

feeds@yuku.com (olgraybeard) — Sat, 07 Nov 2009 17:38:53 GMT

copy of Rick Hocking's vintage flat tracker just a winter project idea

rotor drilling patterns

feeds@yuku.com (olgraybeard) — Sat, 07 Nov 2009 17:35:23 GMT

rotor drilling patterns from sohc4 site

short springer

feeds@yuku.com (bull8secs) — Sat, 07 Nov 2009 17:17:29 GMT

I just picked up a 72 with a springer that is about 18 or 20 over is there any way to cut this thing down to about 6 or 8" over safely? it is rusty and the chrome is bad so dont mind welding on it. ant idea's? it is all solid round bar stock.don't have a clue who made it and it don't have any markings on it. thanks

question about a set of 10 over forks?????

feeds@yuku.com (stubbysteve) — Sat, 07 Nov 2009 17:16:01 GMT

I know I am not going to get a real good answer to this but here goes.............lol

How much is a set of 10 over forks worth? there is pitting where the lower seal rides, and some other surface rust. I can actually get a full front end minus the wheel.

Let me know just kinda a estimate of what they would be worth. I know it is worth about as much as I want to pay......lol

Chimpanzee Bars.

feeds@yuku.com (Chalfa1980) — Sat, 07 Nov 2009 16:31:31 GMT

I may have some extended risers if these aren't tall enough for ya.

$50 shipped.

550 Parts vs 750 parts

feeds@yuku.com (dusty67) — Sat, 07 Nov 2009 14:23:22 GMT

I was driving along minding my own business when a flat bed passed me with what looked like some wrecked 750 bikes on it. I followed and talked to the guys, found out they were 550's. Lots of the parts looked like 750's. I got some parts that were missing from mine for free, the best kind. The coils were there and looked just like mine, he didn't want to sell them. He said he bought the bikes at an auction for $5.00. I offered him $20.00 but he was ugly, not stupid (his...

frame in milwaukee area

feeds@yuku.com (cb750cafe) — Sat, 07 Nov 2009 14:11:23 GMT

I'm looking for a frame in the milwaukee area, titled would be cool. I travel a lot so anyone in the midwest let me know what you've got!

low rise Z bars wanted

feeds@yuku.com (wadeiss) — Sat, 07 Nov 2009 12:25:49 GMT

Hey all, I am looking to purchase some 4in rise 7/8dia. Z Bars. Anyone have one laying around that they want to sell?

OIL COOLER + DOHC COILS

feeds@yuku.com (kevins750) — Sat, 07 Nov 2009 11:36:45 GMT

cooler $60 shipped--needs new O-ring
coils $25 shipped--need 2 screw caps http://community.webshots.com/album/146114158mRUpxD

Need a front brake Master cylinder assembly

feeds@yuku.com (Javahut) — Sat, 07 Nov 2009 10:52:13 GMT

Have 3 of them around here froze right up, anyone have a good front master cylinder asssembly, ASAP, need to get a bike done and out of here!!

OLD SCHOOL RUN

feeds@yuku.com (oldmanhonda) — Sat, 07 Nov 2009 08:21:54 GMT

Old school ride
http://s549.photobucket.com/albums/ii369/oldmanhonda/oldschool/

Hondachopper.com CB750 SOHC Discussion Board