Welcome to HONDACHOPPER.com

New here to Hondachoppers in Colorado

feeds@yuku.com (don80815) — Fri, 06 Nov 2009 06:57:08 GMT

Hello everyone, I am here cause I have just gotten ahold of a 1978 Amen Savior frame with a honda cb750. I have been trying to research things about the engine and am not having much luck. Then I came across the hondachoppers site and so here I am. The main thing I am trying to find out about right now is the numbers on the engine are cb750e-2524667 and I would like to know if these numbers tell the year of it, I have found all kinds of K's and F's, but no E's. And the other...

New from Cincinnati Ohio

feeds@yuku.com (gnutt) — Thu, 05 Nov 2009 07:15:47 GMT

I just picked up a 1975 cb750 that was on its way to looking like a bobber. I have some issues with the bike it feels like it is starving for fuel.The airbox is gone and has little filters on it, so would it need a jet kit or carbs or just adjusted?

hello all

feeds@yuku.com (issac) — Mon, 02 Nov 2009 23:07:44 GMT

I just stumbled on your site while searching the web for parts for 1977 sohc 750 chop.Ive just started the build and am amazed at how scarce
custom parts are on this side of the ocean(Im Irish by the way).Ive been involved with bikes since the mid seventies and have owned five sohc
750 machines over the years.The bike Im building has laid in my shed for over six years following a great coming together with a wall one frosty
night.Id just totally rebuilt the motor so at least my...

any one in the main area

feeds@yuku.com (surfer00) — Thu, 22 Oct 2009 11:01:10 GMT

need some help getting bike from there to maryland

New guy from Central Illinois

feeds@yuku.com (wookie35) — Sun, 11 Oct 2009 10:34:43 GMT

Hi, I recently bought my first inline 4 honda to chop out as a winter project. Its a 1976 CB750 Supersport, barn fresh after sitting for about 5 yrs.. I'm still trying to get my profile filled out on here and I'm looking forward to seeing all the tech and everything else on here. I'm located in Rantoul by the way if anyone is close.

N00B From Idaho

feeds@yuku.com (woodsnake) — Fri, 09 Oct 2009 19:11:51 GMT

Greetings all. I was trying to restore an 83 Goldwing, until I found out how bad the gas tank is.I don't want to do what it will take to get the tank out!
The Goldwing has a ton of potential, but I have other, four wheeled priorities instead. So while I was/am trying to find the GW a new home, I got a smoking deal on a chopper frame and front end.
The GL 1100 will not fit with out stretching the frame another 12 inches or so. I guess I could, but I'd rather not. I don't...

new guy from new jersey

feeds@yuku.com (tool14) — Fri, 09 Oct 2009 08:41:18 GMT

hello everyone ,have 71 750 been saving up to chop bike , times are tough , hope to start by end of year

HELLO

feeds@yuku.com (marvinr) — Thu, 01 Oct 2009 10:43:23 GMT

Hi, everyone just wanted to say Hello to all of you!
Hope i'm doing this right!
Have a Great Day!

hello from marysville ohio

feeds@yuku.com (blackjuju) — Wed, 30 Sep 2009 17:18:47 GMT

hello, i just got a 74 750-4 , savior soft tail frame, girder front end, invader rims and king queen seat with a custom tank. it was disasembled in the late 70s and now i can restore and reassemble it...very cool...also while i was checking into this bike i ran across another 73 750-4 chopper i coundn't pass up. getting it from the original owner/builder...this one has a springer with twistys going down it...very cool also..i hope to get alot of info and advise from the old timers here....

coil blowing fuses?

feeds@yuku.com (kevinst1968) — Tue, 22 Sep 2009 09:45:38 GMT

hi all ive tried everything rewired my bike and was running good for five minutes then melted a coil wire couldnt get spark after that so i bought new condensers and coils points look good but it keeps blowing the 30 amp fuse i checked for shorts and even went with toggle swith and push button start to go basic same thing blows a 30 amp fuse i used after market gm coils from a 1998 s 10 any ideas

New guy from Brookfield Mo

feeds@yuku.com (rayray) — Thu, 17 Sep 2009 09:11:51 GMT

I am new here from Brookfield Mo. I am a friend of stubbysteve's and I am BAC750's ex brother in law.

Stubby is helping me get started on making a bike.

New guy St.louis Area

feeds@yuku.com (Brick) — Wed, 16 Sep 2009 19:26:32 GMT

Hey , Brick here and have finally entered the stage in my life where I can start to expand on my hobbies. Ive been riding for along time and been tinkering with stock Hondas all my life. Finally after what seems and eternity I got my first 750 chopper frame and will begin my first ground up build. I even got my 2 older kids (10 and 7) excite about it and they have already put there ideas as to the looks. I look forward to showing pictures of it as the project goes along and im even more...

Another Noob...From PA

feeds@yuku.com (grounddhogg) — Tue, 15 Sep 2009 21:50:24 GMT

I joined back in 06 and lurked for a while, figured it's time to introduce myself. I go by Groundhogg or Hogg, nickname given at work, no real reason, it is what it is. If I meet you in person I'll tell ya the story. Really not very impressive.

Anyway...forum stuff, I've been a member of Delphi Forums for about 6 years and on a Honda Shadow Spirit forum, www.thespiritworld.org , so I'm real comfortable...

new member from calgary

feeds@yuku.com (calgarychopper) — Tue, 15 Sep 2009 11:02:22 GMT

I have been visiting this site for just over a year.already built one bike and now well underway with #2 and getting started on #3.finally decided to join the club.I am a motor mechanic by trade, having spent 20 years repairing cars for a jeep/mitsubishi dealer.now I co-own a hydraulic repair shop with my wife.we have all the tools for fabrication of almost anything I need.I only farm-out the powdercoating and paint work.

my first honda was a 1976 super sport, pretty rough around...

And one more for the sohc.....

feeds@yuku.com (thepathunderfoot) — Fri, 11 Sep 2009 08:05:13 GMT

Hello from a k3 owner in Marietta Georgia.

new member from belfast

feeds@yuku.com (parandy) — Fri, 11 Sep 2009 00:01:45 GMT

just joined honda chopper so just saying hi from belfast n.ireland
andy

Nube from UT

feeds@yuku.com (Project Savior) — Thu, 03 Sep 2009 14:16:05 GMT

Hey, new here but have read lots of the boards. Have a few questions. 19 and building a amen savior but with the dohc cb750. does anyone know the wiring to this damn thing. the guy that owned it before me makeshifted shit and its just not going back the way it is supposed to.

Rookie from OK

feeds@yuku.com (dlhoulton) — Tue, 01 Sep 2009 11:04:37 GMT

New here. Actually signed up several weeks ago but never posted yet. Have been spending time reading and looking at pictures of bikes. I was lucky enough to snag a great deal from a local guy. Got two bikes: 1977 and a 1978 CB750F2/3 for $500 (total). The 77 was 90% complete and the 78 was in pretty rough shape (but most everything was there). Been working mostly on the 78. Stripped her down and dug into the motor. Going for a total rebuild. This is my first ever attempt at this and with all...

Another New Member

feeds@yuku.com (mre) — Tue, 01 Sep 2009 10:08:33 GMT

Hi all just bought an old 78 750/4 chop that been dumped in the back of a garage for15 years so a little dusty and siezed but turns over. So i may be on here quite a bit for help to soon as i've stripped her down and see what she's like

New From NH

feeds@yuku.com (ogre15) — Tue, 01 Sep 2009 05:42:08 GMT

Hey all,

New guy in So. NH Here.

1985 Honda Shadow VT750