FOR SALE / TRADE

1972 Chop FS

feeds@yuku.com (VORTICITY) — Fri, 09 May 2008 10:31:24 GMT

1972 Honda CB750 Chopper, runs great, twisted springer front end, invader front wheel, chrome octogon oil tank, forward controls, electric and kick start, 16" rear wheel, clear title to original frame, bought recently but need to finish other projects. Asking $2600. Email with questions and for contact information. Bike is near Raleigh, NC.

...

FS:1977 Chop Project

feeds@yuku.com (tncb750) — Thu, 08 May 2008 12:44:02 GMT

I bought this bike to make a Bobber out of...bought a new TC Bros rear section(still in wrapper)...was told the bike ran well but I never tried to start it...does not have the mags shown in picture...comes with stock spoke wheels...clean title....I've found another bike I want to buy so this one needs to go....located in Dyersburg, Tn. 38034....I travel a lot so might be able to deliver for a reasonable amount....$750.00 Paypal prefered....you can also reach me at...

120 main jets, new....

feeds@yuku.com (Houndog750) — Wed, 07 May 2008 20:39:35 GMT

I wound up with an extra set of 120 and 125 main jets. bought them new (from Tommy) but didn't need them. $10 a set (what I paid). Shipping is $5, one set or both.

125s sold.

Almost everything goes(pics added)Done, found new home

feeds@yuku.com (jimmysixpack) — Tue, 06 May 2008 17:53:48 GMT

Time to make room in the garage for the land yacht, so all my extras that I don't have time for are up for sale. I would like it all to go as one lot if at all possible. Would like $1000 for all of it. I'm in Ypsilanti MI. I can be reached @ 734-558-9168. Here's the list.
'74 complete bike w/title motor stuck
'73 frame w/title
1 motor no carbs, head removed s/n 2722987
1 motor no carbs s/n 2240258
1 set of mag rims
1 set of spoke rims, rear...

stretched swing arm, chain and axle FS

feeds@yuku.com (chprdean) — Tue, 06 May 2008 12:09:16 GMT
I posted this on the horse board yesterday. I honestly dont know if it is asking too much but I think its fair considering what is being thrown in with it. I am selling a swing arm that has been stretched 10 inches and the chain along with the stablizer arm for the brakes and axle adjusters, rear axle and the pivot bolt that conects the swingarm to the bike. dont know how to post pics here so if you want to see the swingarm then go to thehorsebc.com and look in the swap meet. Is prob on...

goofy ass bars & C&G king & queen seat

feeds@yuku.com (unkle fester) — Mon, 05 May 2008 18:27:57 GMT
I have no clue as to what you call these bars.....they are pretty cool though.....chrome should clean up nice......$30 shipped ............also C&G King and...

jersey title and neck for sale

feeds@yuku.com (brianis) — Mon, 05 May 2008 17:55:06 GMT
$145 shipped

coffin tank & solo seat (BOTH SOLD)

feeds@yuku.com (unkle fester) — Mon, 05 May 2008 08:55:42 GMT
gotta black coffin tank....18 3/4 inches from mounting hole to mounting hole....about 6 1/2 inches tall....inside is very clean....already has a HCMF sticker on it...one small ding on the upper right corner of it.....$50 shipped................also have a

Found more to sell

feeds@yuku.com (ridelord) — Fri, 02 May 2008 12:20:03 GMT
Hopefully, I'm not biting off more than I can chew with all this but I found some more stuff to offer up to you all. New Link Here. Here's a highlight of what I've got on this round. Again, all prices are (or should be) with the pics:

vest extenders
used stock pistons (actually have 5 only 4 showing)
tappet covers (2 are henry...

140/90/16 $50 delivered (new)

feeds@yuku.com (ONCEANITE) — Fri, 02 May 2008 03:55:49 GMT
I bought this tire and have decided to go with a wider taller tire (160/80/16. Never mounted, $50 bucks to your door.

FIRE(D) Sale!!!

feeds@yuku.com (ridelord) — Thu, 01 May 2008 18:45:04 GMT
Yep, lost the job. No money for groceries. It really sucks to hand the cashier your check card and have it declined...Anyway...

I'm not gonna list everything, but here's THE LINK TO THE PICS and some highlights below. Need this stuff moved FAST!!!:

chopper front fender
stock lights, pegs, bars
helmet
F&K model headers
pipe...

Stocker is SE Indiana

feeds@yuku.com (amidemon) — Thu, 01 May 2008 18:01:35 GMT
OK here it is:

I have a '78K in really good shape. It is missing the left side cover. I do have an aftermarket cover for it (somewhere )
The guy I bought it from dropped it off the kickstand into his workbench, bending the bars. He picked up a set of used
bars and installed them, they are from a Shadow I think. I picked this up about a year ago and haven't had time
to do anything...

ARD Magneto

feeds@yuku.com (thechopperguy) — Wed, 30 Apr 2008 19:00:01 GMT
Well, since I bought Twistedspoke's Joe Hunt/R.C. magneto, I'm selling the ARD that I got from Camhello last year. I'd like to keep it, but I need the cash. It's complete with all the hardware and yellow plug wires. I never ran it, but I spun it with a drill and it sparks. It's polished pretty nicely; has a few scratches here & there, but it looks nice. Here's a link to...

Horse Mag

feeds@yuku.com (gratefuldog) — Wed, 30 Apr 2008 18:24:30 GMT
Divorcing. Moving. Got 20+ issues of The Horse, plus a few assorted other mags... from '02 to '08. Yours for $10 + actual shipping.

20 new chrome acorn oil filter bolts! (ONLY HAVE 4 LEFT)

feeds@yuku.com (kiki licker) — Wed, 30 Apr 2008 17:35:40 GMT
10 bones each shipped in the lower 48

Seats for sale

feeds@yuku.com (ultrafastgsxr) — Tue, 29 Apr 2008 19:58:02 GMT
Seat 1: I believe this one is just a universal king and queen made by drag specialties. some stitches are coming out, a few minor tears. $25 + shipping
http://i56.photobucket.com/albums/g187/Madmaxx600/DSCN1146.jpg

Spend your "Bush Bucks" tax refund to "help" out the economy by buying a project.

feeds@yuku.com (misterskin) — Tue, 29 Apr 2008 18:04:29 GMT

That's right, the checks are in the mail.

All my misc stuff from the other post sold. I figured I would repost everything else as a package deal to everyone here before it hits e-bay. LAST CALL SUCKAS!

I still have the gas tank, oil tank and frame. If someone is able to come pick the stuff up you can get it all,...

hex shaped fender

feeds@yuku.com (swisherred) — Mon, 28 Apr 2008 17:46:53 GMT
dont know how made it, looks NOS, no holes only minor surface rust no dents $45 plus shipping...fits 19" and 21" well. I think its about 4.75" wide overall, but will have to check to be sure.

http://i66.photobucket.com/albums/h254/swisherred/parts/P5100231.jpg

Seat

feeds@yuku.com (ONCEANITE) — Mon, 28 Apr 2008 17:39:59 GMT
I was going to use this SEAT on my new build but it dosen't fit the look I am after. As you can see it fit the swing arm frame ok. It's the same seat in all but 3 of the pictures in the album. It's not perfect but it's not bad either. Has a couple places where the gouchos were removed. I think the fellow I got it from said...

5" Over Fork Tubes

feeds@yuku.com (Jerry Sexton) — Mon, 28 Apr 2008 15:52:08 GMT
I have some tubes that measure 28 1/4". According to this, that'd be about 5" over. Pretty sure they have never been used. $75 plus shipping from 40353.

Email me at sextonjerry@yahoo.com